Flo-Rite-Temp® Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems | Armstrong | EMEA

Flo-Rite-Temp® Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems

Flo-Rite-Temp<sup>®</sup> Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems

Product Specifications

Model Flow Capacity Hot Water Outlet Connection Size
FRT535 35 gpm (132 lpm) 1-1/2″ (38 mm)
FRT665 63 gpm (238 lpm) 2″ (51 mm)
FRT8120 120 gpm (454 lpm) 3″ (76 mm)
FRT535DW 35 gpm (132 lpm) 1-1/2″ (38 mm)
FRT665DW 63 gpm (238 lpm) 2″ (51 mm)
FRT8120DW 120 gpm (454 lpm) 3″ (76 mm)
FRT535P 70 gpm (265 lpm) 2″ (51 mm)
FRT665P 126 gpm (477 lpm) 3″ (76 mm)
FRT8120P 240 gpm (908 lpm) 3″ (76 mm)
FRT535DWP 70 gpm (265 lpm) 2″ (51 mm)
FRT665DWP 126 gpm (477 lpm) 2″ (51 mm)
FRT8120DWP 240 gpm (908 lpm) 3″ (76 mm)

Flo-Rite-Temp® Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems

Flo-Rite-Temp Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems are factory-built water heating packaged solutions inclusive of a shell & tube heat exchanger fitted with an integral control valve for water heating and system temperature control.

The feed forward design instantly determines downstream hot water demand and directs cold water through the heat exchanger. Water is heated above legionella survival temperatures with constant pressure steam and then blended with a proportional amount of cold water to set point temperature.

Flo-Rite-Temp Pre-Piped for Thermostatic Control of Non-Recirculating Hot Water Systems are available with single wall or double wall heat exchangers in 4 standard sizes each with a parallel/redundant option and can be customized to suit.